EZQuest X40213 Dual-USB-C Hub review

The EZQuest X40213 is a MacBook hub for a specific two-port host arrangement. It connects through two USB-C/Thunderbolt ports on one side of the computer, then combines HDMI displays,USB peripherals,Ethernet, cards and charging. Its appeal is the amount of desk connectivity in one compact unit; its main limitation is that both the physical connection and the Mac’s actual display engine must fit the intended setup.

Check the two-port connection first

The manufacturer specifies two Thunderbolt 3 inputs and compatibility with Thunderbolt 3/4 computers. The 16cm lead ends in a combined connection intended for the required pair of MacBook sockets. This is not a generic one-plug USB-C dock. Check the exact computer’s socket spacing and any case before treating the hub as compatible, and leave enough space for the connected cables to rest without pulling on the host plugs.

The current manufacturer page names a precise display split. Intel MacBook s and the named M1/M2/M3 Pro and Max models support its dual HDMI use, as do the separately namedbase M4 and M5 families. The page limits base M1,M2 and M3 to one external display. Those statements are recorded as exact chip families, without borrowing the Pro/Max behavior for a base chip or adding an unnamed Ultra model.

Two HDMI outputs do not give every Mac two desktops

For the documented dual-capable hosts, EZQuest advertises two independent HDMI screens at 4K60. The original manual also distinguishes the HDMI paths: HDMI 2’s highest mode needs DisplayPort 1.4 capability. Verify that complete route on the actual MacBook rather than treating the pair of sockets as an unconditional dual 4K60 guarantee. On a base M1,M2 or M3, the second independent external desktop remains outside the maker’s stated limit.

The VGA connection shares the HDMI 1 display content in the original charts. It is useful for a compatible older display, but it is not another independent desktop to add to the HDMI count. The hub does not rely on a USB graphics workaround that removes the computer’s native display limit.

The older manual documents powered closed-lid use and warns that closing the MacBook without USB-C power can put it to sleep. This review retains a conservative single-HDMI closed-lid arrangement for the documented Intel context. It does not apply that old instruction automatically to every later chip or use it to override a base M3 display limit.

USB data has a clear speed hierarchy

The downstream USB-C data socket is advertised at 10Gbps. Two USB-A sockets are USB 3.0 at 5Gbps, while two others are USB 2.0 at 480Mbps. Put bandwidth-sensitive storage on the faster connections and low-bandwidth peripherals on the USB 2.0 pair. A requirement for four 5Gbps USB-A ports therefore excludes X40213.

EZQuest states a 10Gbps shared data budget. That is an interface capability statement, not a measured copying result or a dedicated allocation to each socket. The USB-C data connection is separate from the PD input, so it can remain available while a charger is attached. Peripheral charging figures also have a shared total; they should not be treated as unlimited power for every connected device.

Cards, network and power

Gigabit Ethernet and the SD/micro SD readers help consolidate a desk. The source explicitly supports simultaneous card access, a useful distinction from hubs that select only one slot at a time. The network link ceiling remains separate from internet-service speed. EZQuest also excludes Apple SuperDrive from the USB-A ports, so that device needs its supported direct connection arrangement.

The current page distinguishes 100W PD input from 85W pass-through output to the computer. The older original manual gives 87W, so this review uses the current 85W figure for minimum-power matching. The box contains the hub and manual; the charger and HDMI cables remain separate requirements. Fast Role Swap is described as helping during a charger disconnect with the lid open, with a specific exception for a bus-powered external drive. Finish storage activity before changing power rather than treating that feature as a universal protection guarantee.

Choose X40213 when its exact two-port MacBook fit and documented display plan match the workstation. A one-lead dock, a different Mac display technology or a hub with more fast USB-A ports is a better target when one of those requirements differs.