Your needs, this model
Does it fit your priorities?
Can I connect three fast external drives?
There are three USB-A sockets, but only one is rated at 5 Gbps. A request for three 5 Gbps data ports excludes this model.
Explore this need in the finder →Will it add one 4K HDMI monitor?
The manual supports one HDMI output at 3840 × 2160 and 30 Hz from a suitable USB-C laptop. It does not promise 4K at 60 Hz.
Explore this need in the finder →Can I keep the laptop charging while using an SD card?
Yes, the manual provides a separate USB-C charging input and an SD slot. You supply the charger; a selected numerical laptop-power minimum cannot pass from the headline alone.
Explore this need in the finder →Useful when your accessories do not all need the same speed
The Inateck SC01002 makes the most sense as a small laptop adapter for a monitor, a camera card and everyday USB accessories. Its seven-port description can otherwise give the wrong impression. The original instruction manual identifies one USB 3.0 Type-A port and two USB 2.0 Type-A ports. That is a useful arrangement for a keyboard, mouse and one faster storage device, but it is not a three-drive SuperSpeed hub.
Start with the device that will move the most data. Put an external drive into the 5 Gbps port, and reserve the slower sockets for accessories whose demands are modest. The advertised line rate is an interface ceiling, rather than a measured file-copy result. If your main task is copying large folders between several fast drives, a hub with several documented 5 Gbps ports is a better foundation.
One HDMI screen, with a clear refresh-rate limit
The HDMI output is specified for a maximum of 3840 × 2160 at 30 Hz. That supports a single 4K desktop at the stated refresh rate. It does not turn the SC01002 into a 4K 60 Hz adapter, nor does it provide two independent external displays. A buyer who spends most of the day moving windows or scrolling text should decide whether the 30 Hz limit at 4K is acceptable before choosing it.
Your laptop must also support the necessary video function through its USB-C connection. A matching connector shape is not enough. The reviewed manual names Windows 7, 8 and 10 and OS X, without providing a modern chip-by-chip Mac compatibility table or a precise DisplayPort protocol version. Check the computer's own video specifications when the laptop is the uncertain part of the setup.
Charging has a separate input, but the headline is not a power budget
The USB-C PD socket connects an external charger, so you can charge the computer while the adapter is in use. The listed package contains the SC01002 and its instructions; it does not supply a laptop charger. Reusing an appropriate charger may therefore keep the travel kit small, whereas buying this adapter alone does not complete a powered desk setup.
The manual advertises charging up to 100 W, but its troubleshooting example explains that the hub retains power for itself: a 61 W charger is described as delivering approximately 55 W to a 13-inch MacBook Pro. The same section refers to around 5 W of hub consumption. Those details are a reason to leave room in your charger selection, not a basis for calculating a universal guaranteed output by subtraction. We do not assign a verified net laptop-power ceiling from them.
Memory cards and portable-drive power
Both SD and microSD slots are documented, including SDHC and SDXC support. The manual does not establish whether both card slots can transfer at the same time, so a workflow requiring simultaneous cards needs another confirmed arrangement. Having two openings is not sufficient evidence of independent card operation.
Power is another practical limit. Inateck advises against attaching two or more high-power portable devices simultaneously, because peripheral power depends on the upstream computer connection. A separate laptop-charging socket does not automatically guarantee abundant power for multiple bus-powered drives. For a collection of demanding disks, choose a hub whose external supply and downstream power arrangement are explicitly suited to that job.
Small enough to carry, with a sensible scope
The manual lists an aluminum body measuring 102 × 40 × 13 mm and weighing 73 g. That makes this a portable adapter rather than an installation accessory or a large permanently powered dock. Its troubleshooting advice also recognizes possible interference between USB 3.0 operation and 2.4 GHz wireless devices; moving the receiver away or using a 5 GHz Wi-Fi connection are suggested remedies, not proof that every system will experience interference.
Choose the SC01002 for a modest mixed-accessory setup: one HDMI screen, occasional card access and one faster USB-A device. Choose a different model when all three USB accessories need SuperSpeed, two screens must remain independent, or the laptop needs a documented numerical power guarantee.
Key details at a glance
| USB-A downstream data ports | 3 |
|---|---|
| USB-C downstream data ports | 0 |
| HDMI outputs | 1 |
| Full-size DisplayPort outputs | 0 |
| USB-C video outputs | 0 |
| Full-size SD slots | 1 |
| microSD slots | 1 |
| Advertised Ethernet link ceiling | 0Gbps |
| Power adapter included | No |
| Stated product weight | 73g |
| Host requirements | The reviewed manual names Windows 7/8/10 and OS X. A USB-C plug alone does not establish that a particular computer can supply native HDMI video. |
| Power and charging | The separate USB-C socket connects a charger. The manual uses an up-to-100 W charging headline but also describes about 5 W reserved for the hub; no guaranteed net host ceiling is assigned here. |
| Data and device limits | One USB-A port is USB 3.0 at up to 5 Gbps; the other two are USB 2.0. These are not three SuperSpeed ports. |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
Find a hub or dock for your desk.
Match the computer, screens, devices and charging routine, then check the exact supported arrangement.