LENTION H22s USB-A 4-Port Hub review

Four familiar ports from a USB-A computer connection

The H22s suits a computer that already has a rectangular USB-A port but needs more places for ordinary data peripherals. Its four downstream USB-A sockets are accessed vertically, with a short attached lead connecting the compact aluminum body to the computer. It is a focused data accessory rather than a display dock or a laptop charging solution.

The deciding point is the supplied host plug. This is the USB-A model. LENTION mentions using an OTG adapter with some USB-C devices, but says that adapter is not included. If your computer only has USB-C, compare an actual USB-C version or account for the separately supported adapter arrangement rather than assuming both connections come with this hub.

Use the vertical layout deliberately

The upright insertion direction can make it easier to see and reach several connected plugs on a desk. Plan around the shape of the actual devices, not only the number of sockets. A wide flash drive or a bulky receiver can need more surrounding room than a narrow cable plug.

The maker lists a 4.72-inch host cable. That short reach can keep an accessory close to a laptop, but it is not a way to move every cable to the far side of a large desk. Check where the computer’s port sits and whether the hub can rest in a sensible position when the lead is connected.

Four connections share the computer link

LENTION advertises USB 3.0 data capability up to 5 Gbps and says multiple ports can operate together. That establishes a four-port data layout; it does not give four independent 5 Gbps paths back to the computer. A group of busy storage devices shares the upstream connection.

The right mix depends on your workload. Several low-bandwidth peripherals and an occasional file transfer are different from sustained copying between several drives. The hub also cannot turn an older, slower computer connection into a faster one simply by adding USB 3.0-labeled sockets.

The no-charging note changes the buying decision

The manufacturer explicitly says this model is not for charging. Treat it as a way to connect data peripherals, not as an independent charger for a phone, tablet or laptop. A socket that can communicate with a device is not automatically the right charging arrangement for it.

Check the power needs of attached peripherals in their own instructions, especially external storage. If power availability is central to your setup, a separately powered hub with a clear budget may be a better choice. The H22s’s small footprint should not be stretched into a promise that every collection of devices can be powered together.

Keep the connection list simple

The four outputs are USB-A data sockets. There is no built-in HDMI connection, Ethernet jack or card-reader slot in the documented layout. A separate card reader could be a USB peripheral, but that is different from buying a hub with one already built in.

The source lists Windows 10 and several earlier Windows versions, Mac, Linux and Chrome OS without requiring extra hub drivers. Its named Mac examples are older Intel-era MacBook models. Check a specific unlisted computer or operating-system version rather than treating that list as a guarantee about every future device.

A sensible role for a small data hub

Choose the H22s when a USB-A host, four USB-A data connections and a close-to-computer placement match the job. The short cable and vertical layout can be useful for that focused setup. Choose a different arrangement for a USB-C-only host, laptop charging, video output or a documented powered-peripheral budget. Those requirements matter more than adding a larger port count you do not actually need.

LENTION’s H22s description, port map, cable information, compatibility and explicit no-charging note support this assessment.