QGeeM UH07-3: threeUSB-A ports beside a 4K30HDMI output review

A simple one-HDMI notebook arrangement

The QGeeM UH07-3 combines one HDMI output with three USB-A data ports, SD and microSD readers and a USB-C PD input. It suits a notebook whose single external monitor can operate at 4K30 and whose accessories mostly use USB-A. Its useful distinction from QGeeM's five-port data hub is the addition of video and notebook charging, rather than just a larger total number.

The exact UH07-3 model appears in the manufacturer title. QGeeM sells many similarly described hubs, including other seven-in-one models with different USB counts and display ceilings. Confirm UH07-3 on the actual product or offer before borrowing these details. A similar color or the phrase “seven-in-one” is not enough to identify the same hardware.

The host must carry native video

QGeeM explicitly requires DisplayPort Alt Mode from the host's USB-C socket. That is the computer-side video function that lets the hub feed its HDMI output. A USB-C connection offering only USB data cannot satisfy the same display arrangement, even though the plug fits. The source does not specify an exact DisplayPort revision.

The HDMI output supports up to 4K at 30Hz and can mirror or extend a supported computer's display. It supplies one external screen connection. A4K60 requirement exceeds this model's stated ceiling, and two independent external screens require a different arrangement. The 30Hz ceiling is worth considering for a screen used heavily for movement as well as for static documents.

The maker explicitly names MacBook M1, M2 and M3 along with Windows, ChromeOS, Linux, MacOSX and USB-C iPad Pro examples. These are compatibility claims for the stated native-video connection, not evidence for later M4 or M5 models. The page also explicitly says no driver is required for the hub, which is distinct from a USB graphics dock that needs a display application.

Three data ports and two readers

The three USB-A3.0 sockets have an advertised 5Gbps maximum data rate. They can connect accessories such as a mouse, keyboard or storage device. Traffic still shares the host connection, so several active drives do not each gain a separate full 5Gbps route back to the computer. No copying benchmark is implied by the line-rate specification.

SD and microSD slots provide direct card access. QGeeM does not establish simultaneous use of both cards in the retained description, so a workflow requiring that remains unconfirmed. The slot count alone should not be turned into a promise about concurrent transfers or a specific card-read speed.

The USB-C input is exclusively for power

The USB-C PD socket is explicitly described as accepting charging power only. It does not support data transmission or video. A USB-C drive therefore has no documented downstream USB-C connection on this hub. The three USB-A ports remain the ordinary accessory-data outputs, and QGeeM specifically says those USB3.0 ports are not for charging.

The PD input accepts up to 100W. That establishes the input ceiling, not a separate guarantee of 100W delivered to the notebook after the hub's own needs. QGeeM advises connecting an external supply to provide sufficient power. Plan the charger, cable and notebook requirements together, particularly if a firm minimum host wattage matters.

Where another hub makes more sense

Choose UH07-3 for a documented one-screen 4K30 setup with USB-A accessories and occasional card access. Choose a 4K60 design for that higher refresh requirement, or a hub with a genuine USB-C data output for a USB-C drive. Those socket and display differences are more meaningful than counting the seven advertised functions without considering how the desk will actually be connected.

Assign the USB-A sockets to data peripherals rather than treating them as a replacement phone charger. The maker separates that accessory use from the notebook charging input. A setup that needs both a USB-C storage drive and notebook charging would also need an actual C data socket, which this port map does not supply.