Your needs, this model
Does it fit your priorities?
Can a documented Windows computer use three 5Gbps USB-A devices and Gigabit Ethernet?
Qualifies on the supported data host; Ethernet uses the documented OS-specific driver arrangement.
Explore this need in the finder →Does the included C adapter add an HDMI screen?
Fails: it changes the data host connector; this hub has no display route.
Explore this need in the finder →Can this hub charge my notebook?
Fails: it is a bus-powered data/network device with no notebook PD path.
Explore this need in the finder →The included adapter is part of the host arrangement
The SIIG JU-H30112-S1 combines three USB-A data ports with a Gigabit Ethernet connection. Its attached USB-A host lead tucks away for travel, while an included USB-C male to USB-A female adapter provides the documented alternative host connector. That package detail is useful when working between older Type-A computers and compatible Type-C machines.
This is the SuperSpeed USB3.0 LAN Hub–Type-C Ready covered by SIIG's 04-1006A original manual. It is a data and networking adapter. The USB-C adapter does not add display signalling, Power Delivery or a new downstream USB-C socket. Keep those roles separate when deciding whether this small hub can replace a dock.
Three ordinary USB data connections
The three USB-A outputs support USB3.0 signalling up to 5Gbps and retain compatibility with slower USB devices. They share the host connection with networking. Their port ratings therefore do not promise three independent full-rate storage transfers while Ethernet is also busy.
SIIG identifies a VIA VL812-B2 USB hub controller and a Realtek RTL8153-CG network controller in the original specifications. Those identities can help an administrator verify the correct historical drivers. They are not measurements of throughput, latency or performance with a particular disk. This review does not substitute controller names for independent testing.
Networking installation depends on the OS
The Ethernet connection supports 10/100/1000Mbps networks. The guide says its driver normally installs automatically under Windows 7, 8.x and 10, with installation from the included CD if that does not happen. Windows XP and Vista use explicit driver-installation steps. A computer that prohibits extra software consequently needs its exact operating-system route checked before relying on Ethernet.
The Mac reference covers OS X10.6 through 10.11 and includes network-driver installation or update instructions from the CD. That does not establish a universal software-free promise for every supported Mac version. Linux is also listed historically, but the retained guide does not establish every current distribution or kernel.
This is an earlier compatibility reference based on the 2015 manual. The label describes the source and supported-era context, not a claim that SIIG has officially discontinued the hardware. No exact Apple Silicon chip support is inferred from generic historical Mac wording.
Bus power has a limited purpose
The hub is powered through its computer connection and does not require a separate AC adapter in the documented package. The guide's 5V/500mA power entry should not be read as a notebook charging specification or a guaranteed independent budget for every attached accessory. Plan demanding peripherals according to their own power requirements.
There is no PD input to accept a notebook charger and no host charging path through the supplied USB-C adapter. If a travel setup needs to power the computer through the same hub connection, this product does not meet that requirement. It concentrates on accessory data and a wired network.
Small details matter in a travel package
The host lead is approximately 6.69in long. SIIG gives body dimensions of 3.27 ×0.71 ×1.81in and a weight of 0.12lb. The package includes the hub, USB-C adapter with its retaining tie, driver CD and guide. On an older or incomplete package, the missing C adapter would change which host connector is immediately available.
There are no card slots, HDMI, DisplayPort or audio connectors to count among the three USB outputs. That restrained map can suit an existing notebook whose priorities are a keyboard, storage device, another USB accessory and Ethernet. Allocate power and shared bandwidth sensibly rather than treating it as an externally powered workstation dock.
Choose the JU-H30112-S1 when its documented A/C host arrangement and historical Ethernet setup match the computer. Verify the small adapter and software access as carefully as the three-port count. Those practical checks determine whether its travel-friendly design will provide the connections the user actually needs.
Key details at a glance
| USB-A downstream data ports | 3 |
|---|---|
| USB-C downstream data ports | 0 |
| HDMI outputs | 0 |
| Full-size DisplayPort outputs | 0 |
| Mini DisplayPort outputs | 0 |
| Full-size SD slots | 0 |
| microSD slots | 0 |
| Advertised Ethernet link ceiling | 1Gbps |
| Maximum stated power available to host | 0W |
| Power adapter included | No |
| Detachable host cable | No |
| Included host-cable length | 6.69 in |
| Stated product weight | 54.4g |
| Host requirements | Tuck-away USB-A lead plus supplied USB-C male to USB-A female adapter. These are A/C data routes, with no display output. |
| Power and charging | Bus-powered. The guide’s 5V/500mA entry is not notebook Power Delivery. No external AC adapter is included. |
| Data and device limits | Three USB-A5Gbps ports share the upstream link with the Realtek RTL8153-CG Ethernet controller. The hub uses a VIA VL812-B2 controller. |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
Find a hub or dock for your desk.
Match the computer, screens, devices and charging routine, then check the exact supported arrangement.